INCH-POUND
MIL-DTL-27235B
28 April 2014
SUPERSEDING
MIL-P-27235A
27 November 1968
DETAIL SPECIFICATION
PIN, STRAIGHT, HEADED
(CLEVIS PINS)
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers solid, metal, cylindrical, headed straight pins, which are
commonly referred to as clevis pins (see 6.1).
1.2 Classification. Clevis pins shall be of the following types and sizes, as specified (see 6.2).
1.2.1 Types.
Type I - Carbon steel
Type II - Corrosion - resisting steel
Type III - Brass
1.2.2 Sizes. Sizes shall be in accordance with MS35810.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
standard. This section does not include documents cited in other sections of this standard or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements of documents cited in sections 3, 4, or 5 of this standard, whether or not
they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications and standards
form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to Defense
Supply Center Philadelphia (DSCP), ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia,
PA 19111-5096 or e-mail to dscpg&ispecomments@dla.mil . Since contact information can
change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.dla.mil .
AMSC N/A
FSC 5315
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business