A-A-2670A
3.1 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR)
4. QUALITY ASSURANCE PROVISIONS
4.1 Contractor Certification – The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
4.6 Testing.
4.6.1 Performance test. Each sample strip of staples selected in accordance with paragraph 4.5 shall be loaded into an appropriate tacker for the type I or II staple being tested. One-hundred type I or fifty type II staples, as applicable from each strip shall be driven into a clear piece of finished Douglas fir lumber to full penetration. The sample strip shall be considered nonconforming if 98 percent of the staples in the strip do not dispense smoothly and achieve full penetration or any staple buckles, fractures or exhibits any other defect.
5. PACKAGING
5.1 Type I. Thirty-six (36) strips of staples shall be packaged in a close-fitting box of the type normally use for this product. Each box shall contain a minimum of 5,040 staples. The box shall be secured to prevent accidental opening during shipment, handling, storage and redistribution.
5.2 Type II. Sixty (60) strips of staples shall be packaged in a close-fitting box of the type normally use for this product. Each box shall contain a minimum of 5,040 staples. The box shall be secured to prevent accidental opening during shipment, handling, storage and redistribution.
5.3 Packaging. Preservation, packing, and marking shall be as specified in the contract or order.
6. NOTES
6.1 Source of documents
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business